
Every advanced machine starts with a metal we don't make
Every advanced machine America wants to build starts with a metal most Americans never think about. Tungsten carbide keeps drill bits and cutting tools sharp. Tantalum keeps the electronics in satellites and fighter jets running. Titanium holds up airframes and jet engines. Germanium, hafnium, and zirconium sit inside chips, fiber-optic networks, and nuclear reactors.
The United States imports most of these metals, and for many of them the critical step, turning a refined oxide powder into usable metal, happens in China. Metals production rarely sprouts new companies, and this part of the supply chain needs them now.
Today, General Flash announced $128 million in funding across its Seed and Series A to make critical metals in the United States. We co-led the Seed last year, and we're proud to double down on the Series A.
Where critical metals come from today
Conversations about critical minerals usually start at the mine. The tighter chokepoint sits one step later, in refining. China holds more than 80% of refining capacity for many critical materials, and the U.S. Geological Survey counts 14 minerals, from antimony to tungsten, that China now restricts from export to the United States. A few examples from USGS's 2026 data:
- Tungsten. About 60% of the tungsten the U.S. consumes goes into cemented carbide parts for cutting and wear-resistant tools in construction, metalworking, mining, and oil and gas drilling. The rest goes into specialty steels, alloys, and electrical components. No U.S. mine has produced tungsten commercially since 2015, imports cover more than half of U.S. consumption, and China mined roughly four of every five tons of the world's supply in 2025.
- Tantalum. Tantalum powders go into high-reliability electronic components, and tantalum ingots go into high-temperature superalloys. The U.S. imports all of its tantalum. From 2021 to 2024, China supplied 47% of U.S. imports of tantalum metal and powder, followed by Germany (25%) and Kazakhstan (16%).
- Titanium. Aerospace, defense, and medical manufacturers depend on titanium, and every titanium part starts as titanium sponge. The U.S. produced no titanium sponge in 2025 and imported all of it, mostly from Japan, Saudi Arabia, and Kazakhstan. China produces roughly 69% of the world's supply.
- Rare earths. China supplied 71% of U.S. imports of rare-earth compounds and metals from 2021 to 2024. These elements end up in the permanent magnets inside electric motors, drones, and guidance systems.
- The rest of the list. Germanium goes into fiber optics, infrared optics, and semiconductors. Hafnium and zirconium go into chips, nuclear reactors, and superalloys. Niobium and molybdenum strengthen steels and jet engine alloys.
Washington has taken notice. Department of War rules that take effect January 1, 2027 will bar Chinese supply of many critical materials from U.S. defense supply chains. That shift creates demand for domestic metal faster than the incumbent industry can build capacity.
The old way can't scale fast enough
Today, turning oxide into metal means hours of batch chemistry in a furnace or, for titanium, the Kroll process: a chlorine-and-magnesium loop developed in the 1940s. Incumbent plants run batch cycles of 10 to 28 hours, operate at thousands of tons per year, and take years to permit because of the chlorine and water involved. Those economics favor a few very large plants, and they explain why so few new companies have entered metals production in decades.
A new way to make metal
General Flash starts from first principles. Its Solid-State Flash Electrolysis (SSFE) process drops commercial metal-oxide powder through an electric field and a hydrogen plasma. The oxygen leaves as steam, and finished metal powder comes out the bottom in under a second. Nothing melts, nothing gets chlorinated, and the process leaves behind no halides, salts, slag, or direct emissions.
The process is also metal-agnostic. General Flash starts with tungsten, tungsten carbide, and tantalum, with titanium and molybdenum piloting behind them. The same hardware can run hafnium, zirconium, germanium, niobium, yttrium, and rare earths.
The hardware matters as much as the chemistry. Each General Flash reactor is a compact unit that runs continuously on electricity and hydrogen, and a full commercial plant fits inside a warehouse rather than a sprawling chemical complex. That changes who can build refining capacity in America, where they can build it, and how fast.
From discovery to first plant in two years
The team came together in late 2024 around an MIT research project, uncovered the physics behind SSFE in 2025, and had a proof-of-concept reactor running later that year. Today, a pilot reactor near MIT produces about 20 tons of metal per year. General Flash has broken ground on its first commercial plant in Massachusetts, sized for 1,000 tons per year, with production starting in summer 2027 and further expansion planned in Texas. The $128 million the company has raised fully finances that first plant.
Why we doubled down
We've known and worked with Ric Fulop since his days at A123 Systems and Desktop Metal. Ric has spent his career taking hard science out of the lab and into production, and he has assembled a team built for exactly that: physicists, materials scientists, and manufacturing veterans from MIT, Harvard, Princeton, and Desktop Metal, with faculty partners at MIT and CU Boulder.
We co-led General Flash's Seed last year, and we're excited to double down on the Series A alongside Lux Capital and Overmatch Ventures, with GreatPoint Ventures, Pillar VC, Lowercarbon Capital, Ensemble VC, and Ravelin.
At Construct, we back founders who rebuild Foundational Industries from the ground up. Refining sits at the center of that work: it carries the highest margins in the critical minerals chain, and today China controls most of it. General Flash shows that the next generation of heavy industry can be built here.
Congrats to Ric and the entire General Flash team.